According to the feedback that i have received from the current Isolated 4 port USB to TTL UART, I have started to design a different version of that project but more industrial friendly and supporting multiple protocols. The new features are the following: Plastic case with DIN support USB B connector, more robust respect to […]

We have removed the products of the I2C encoder with the encoder and connector soldered, and we have added two new products: I2CEncoder V2.1 with soldered accessoryI2CEncoder Mini with soldered accessory Now you can choose several options of encoders, connectors and cables.You will thus receive the assembled boards ready to be used!  

After waiting almost 3 months, the RGB encoders are arrived! Two packages from Taiwan, for a 21Kg of encoders for a total of 3000pcs… Now i think we have enough encoders for a couple of years. Here a couple of images:

The RGB LED Ring is an accessory of the rotary encoder. The shaft of the encoder can be insert in the center hole of the board. It support both the normal rotary encoder and the RGB encoder. There are 48 RGB LED disposed in a circle with a 40mm diameter. In total there is 144 […]

I2C Encoder Mini is mini version of our best selling product! It is a small board where you can use a rotary encoder with a I2C bus. This can be useful in case you have few GPIO because with 3 pins you can control up to 127 devices. The I2C Encoder Mini will count and […]

What it is and its story We have married at May 6, 2018. Since we both of us are Electronic Engineers, we had decided to make these Bride Badges to attach on Wedding favors we had prepared to each wedding guests as a gift. The badge has 2 touch pads, 18 micro RGB LEDs and […]